From: http://groups.google.com/group/android-building/browse_thread/thread/4f85d9242667a85f?pli=1

Hi! We just released a bit of code we thought this group might be interested in.
Over at our Android Open-Source Project git servers, the source code
for Android version 4.0 (Ice Cream Sandwich) is now available.
Here’s how to get it:Follow the instructions at
http://source.android.com/source/downloading.html Check out the
‘ics-release’ branch:repo init -u
https://android.googlesource.com/platform/manifest -b android-4.0.1_r1
That’s it! However since this is a large push, please be aware that it
will take some time to complete. If you sync before it’s done, you’ll
get an incomplete copy that you won’t be able to use, so please wait
for us to give the all-clear before you sync.
This is actually the source code for version 4.0.1 of Android, which
is the specific version that will ship on the Galaxy Nexus, the first
Android 4.0 device. In the source tree, you will find a device build
target named “full_maguro” that you can use to build a system image
for Galaxy Nexus. Build configurations for other devices will come
later.
Unfortunately we still don’t have our Gerrit code review servers back
online. That remains our top priority though, and we hope to have them
back soon.
This release includes the full history of the Android source code
tree, which naturally includes all the source code for the Honeycomb
releases. However, since Honeycomb was a little incomplete, we want
everyone to focus on Ice Cream Sandwich. So, we haven’t created any
tags that correspond to the Honeycomb releases (even though the
changes are present in the history.)

JBQ, on behalf of the AOSP team.
–
Jean-Baptiste M. “JBQ” Queru
Software Engineer, Android Open-Source Project, Google.

Questions sent directly to me that have no reason for being private
will likely get ignored or forwarded to a public forum with no further
warning.

KGTP is a realtime and lightweight Linux Kernel GDB debugger and tracer. It makes Linux Kernel supply a GDB remote debug interface. Then GDB in current machine or remote machine can debug and trace Linux through GDB tracepoint without stopping the Linux Kernel. And even if the board doesn’t have GDB on it and doesn’t have interface for remote debug. It can debug the Linux Kernel using offline debug. Now, it supports X86-32, X86-64, MIPS and ARM.

This article describes how to use kgtp debug linux kernel on android.

Kernel Building

 General setup  --->
     [ * ] Prompt for development and/or incomplete code/drivers
     [ * ] Kprobe
Kernel hacking  --->
     [ * ] Compile the kernel with debug info
     [ * ] Compile the kernel with frame pointers

Building KGTP

Config KGTP Makefile

KERNELDIR := /work/vc1000/src/kernel-vc1000-2.3
ARCH=arm
CROSS_COMPILE=/usr/local/arm/arm-2009q3/bin/arm-none-linux-gnueabi-

error: ‘GTP_VAR_RDTSC_ID’ undeclared(latest version fixed By: teawater )

  CC [M]  /home/border/work/kernel/kgtp/trunk/gtp.o
/home/border/work/kernel/kgtp/trunk/gtp.c: In function 'gtp_gdbrsp_qtv':
/home/border/work/kernel/kgtp/trunk/gtp.c:6318: error: 'GTP_VAR_RDTSC_ID' undeclared (first use in this function)
/home/border/work/kernel/kgtp/trunk/gtp.c:6318: error: (Each undeclared identifier is reported only once
/home/border/work/kernel/kgtp/trunk/gtp.c:6318: error: for each function it appears in.)
/home/border/work/kernel/kgtp/trunk/gtp.c:6320: error: implicit declaration of function 'rdtscll'

* solution:

diff --git a/trunk/gtp.c b/trunk/gtp.c
index 4d0c9a2..75c145e 100644
--- a/trunk/gtp.c
+++ b/trunk/gtp.c
@@ -6315,11 +6315,13 @@ gtp_gdbrsp_qtv(char *pkg)
                if (num == GTP_VAR_CLOCK_ID) {
                        val = (uint64_t)GTP_LOCAL_CLOCK;
                        goto output_value;
+#ifdef CONFIG_X86
                } else if (num == GTP_VAR_RDTSC_ID) {
                        unsigned long long a;
                        rdtscll(a);
                        val = (uint64_t)a;
                        goto output_value;
+#endif
                } else if (num == GTP_VAR_XTIME_SEC_ID
                           || num == GTP_VAR_XTIME_NSEC_ID) {
                        struct timespec time

Complie and Install KGTP

make
sudo su
adb push gtp.ko /system/vendor/lib
exit

KGTP Running On Android

#Open the KGTP interface in current machine.
su
cd /system/vendor/lib
insmod gtp.ko
lsmod
nc -l -p 1234 < /sys/kernel/debug/gtp > /sys/kernel/debug/gtp

Host PC

cd /work/vc1000/src/kernel-vc1000-2.3
make -j8

Network connect to gtp

# symbian use "set gnutarget elf32-littlearm-symbian"
# vxworks use "set gnutarget elf32-littlearm-vxworks"
gdb-release -ex "set gnutarget elf32-littlearm" -ex "file ./vmlinux"

# if you want see the debug info
(gdb) set debug remote 1

# connection your remote device
(gdb) target remote 192.168.2.213:1234

USB connect to gtp

sudo su
# forward socket(adb forward <local> <remote>)
adb forward tcp:1234 tcp:1234
exit
gdb-release -ex "set gnutarget elf32-littlearm" -ex "file ./vmlinux"
# connection your remote device
(gdb) target remote 127.0.0.1:1234

Debugging with gtp

(gdb) trace vfs_readdir
Tracepoint 1 at 0xc02289f0: file /build/buildd/linux-2.6.35/fs/readdir.c, line 23.
(gdb) actions
Enter actions for tracepoint 1, one per line.
End with a line saying just "end".
>collect $reg
>end
(gdb) tstart

Change To Android Device Shell And Run ls Command * Android Device

$ ls

Back To Host PC GDB Shell * Host PC

(gdb) shell ls
vmlinux-2.6.35-30-generic
(gdb) tstop
(gdb) tfind
Found trace frame 0, tracepoint 1
#0  vfs_readdir (file=0x0, filler=0x163d8ae3, buf=0x18c0) at /build/buildd/linux-2.6.35/fs/readdir.c:23
23      {

Good luck, Happy Hacking…

Very grateful for teawater

References

* kgtp Linux Kernel GDB Tracepoint module

* kgtp Quick start

* kgtp How to

* How To Use KGTP In Android

* GDB Tracepoints

Rob’s talk, “Lexical Scanning in Go“, discusses the design of a particularly interesting and idiomatic piece of Go code, the lexer component of the new template package.
Lexical Scanning in Go – Rob Pike

The slides are available here. The new template package is available as exp/template in Go release r59. In a future release it will replace the old template package.

Andrew’s talk, “Cuddle: an App Engine Demo“, describes the construction of a simple real-time chat application that uses App Engine’s Datastore, Channel, and Memcache APIs. It also includes a question and answer session that covers Go for App Engine and Go more generally.

Cuddle, A go AppEngine Demo – Andrew Gerrand

The slides are available here. The code is available at the cuddle Google Code project.
From: http://blog.golang.org/2011/09/two-go-talks-lexical-scanning-in-go-and.html

Android 2.3系统彩蛋(Zombie art by Jack Larson)相关代码:

在网上看到Android2.3有个“Zombie art by Jack Larson”（Jack Larson 的僵尸艺术）的彩蛋, 没事的时候找了一下相关代码的实现.

packages/apps/Settings/src/com/android/settings/DeviceInfoSettings.java onPreferenceTreeClick
点击Android version相关代码实现:

@Override
public boolean onPreferenceTreeClick(PreferenceScreen preferenceScreen, Preference preference) {
if (preference.getKey().equals("firmware_version")) {
System.arraycopy(mHits, 1, mHits, 0, mHits.length-1);
mHits[mHits.length-1] = SystemClock.uptimeMillis();
if (mHits[0] >= (SystemClock.uptimeMillis()-500)) {
Intent intent = new Intent(Intent.ACTION_MAIN);
intent.setClassName("android",
com.android.internal.app.PlatLogoActivity.class.getName());
try {
startActivity(intent);
} catch (Exception e) {
}
}
}
return super.onPreferenceTreeClick(preferenceScreen, preference);
}

实现代码:

frameworks/base/core/java/com/android/internal/app/PlatLogoActivity.java

public class PlatLogoActivity extends Activity {
Toast mToast;

@Override
protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);

mToast = Toast.makeText(this, "Zombie art by Jack Larson", Toast.LENGTH_SHORT);

ImageView content = new ImageView(this);
content.setImageResource(com.android.internal.R.drawable.platlogo);
content.setScaleType(ImageView.ScaleType.FIT_CENTER);

setContentView(content);
}

@Override
public boolean dispatchTouchEvent(MotionEvent ev) {
if (ev.getAction() == MotionEvent.ACTION_UP) {
mToast.show();
}
return super.dispatchTouchEvent(ev);
}
}

僵尸图片保存在这里:

frameworks/base/core/res/res/drawable-nodpi/platlogo.jpg

参考: Android 2.3系统隐藏的彩蛋 你信不信？